The USB-C ports on modern MacBook Air, MacBook Pro, and MacBook are the only connections you have on your laptop and you need them to work for you at all times. This becomes even more important if you're using a USB-C hub so you can connect other peripherals and accessories to your Mac.
Before we get into the software fixes, let's start with the simplest solution of all: restarting your Mac. Switch the Mac off and back on again. You'll be surprised at how many problems a quick restart solves.
Next, check the USB device. There's a chance that it could have failed, particularly so if you're using a cheaper cable. Inspect the device visually, looking for damage to the connector and any signs of frayed wiring. If there is no apparent damage, take two different USB devices and test them against different ports. If the devices aren't working on one or all of the ports it's more likely to be an issue with your Mac and not the device.
- If the program recognizes a different USB device, the problem is not the Mac; you just need to change the USB device you are using. You may also want to check the USB ports on the Mac to make sure there isn't any debris or dust lodged in it. If there are, use a soft cloth to clean out the dust or a toothpick to remove any debris. Restart the Mac.
- Here are the steps I took to create the bootable USB drive (I have a Mid-2014 MacBook Pro with Retina Display): Downloaded the latest OS X El Capitan (10.11.3) from the Mac App Store. Created a bootable USB drive using createinstallmedia (as explained in Apple's documentation) and it went well. Erased Macintosh HD. Tried booting from USB drive.
- However, if the USB flash drive is not mounted on Mac, you will lose access to the USB flash drive as well as to the data stored on it. But don't worry, this page talks about the reasons for this issue, and how to fix 'USB flash drive not mounting on Mac' without data loss even if external hard drive is not showing up on Mac.
A USB device that works on one port but not another is a sign of a faulty port. If this is the case, the only real solution is to contact an authorized Mac specialist for a hardware diagnostics test and have the port repaired.
If the device doesn't work in any of your ports, then continue reading for some potential fixes. Seagate backup plus not detected mac.
What to do if Mac USB devices are not working
All of your Mac or MacBook USBs not working is actually better news than one failing. It's unlikely that all of your ports would fail at once which means the fix is probably an easy one. Www freeblackjack com.
Here are three things to try, starting with the most common fix.
1. Reset the SMC
Resetting the SMC (System Management Controller) is a simple fix that cures a wide range of hardware issues. How this is done depends on whether you're using a MacBook or Mac desktop.
Resetting the SMC on a MacBook
- Shutdown your MacBook.
- Connect the power adapter.
- Hold Shift+Control+Option and the Power button at the same time.
- Release all the keys at the same time.
- Let your MacBook boot up as usual and the SMC will be reset.
Resetting the SMC on an iMac, Mac mini, or Mac Pro
- Shut down your Mac.
- Disconnect the power cord.
- Press and hold the Power button for 5 seconds and release.
- Reconnect the power cord and switch the Mac back on.
2. Check for updates
Outdated firmware and software results in various hardware issues, including. Yep — Mac USB ports not working.
Check for system updates by opening the App Store and clicking on the Updates tab. If updates are available, click on the Update button next to each application that you want to install.
3. Reset PRAM/NVRAM
The PRAM (Parameter RAM) and NVRAM (Non-Volatile RAM) hold information about various USB components. Resetting them could be the solution to your USB woes.
It's a slightly different process to resetting the SMC, but no less difficult.
- Shutdown your Mac.
- Restart it, holding down Command+Option (ALT)+P+R as you do.
- Hold down the keys until you hear a sound and see the screen flash.
- Listen for the chime sound and let the Mac boot up as usual.
4. Uninstall potentially conflicting apps
Format Usb On Mac
If the USB ports not working on your MacBook Pro or iMac is a recent issue and there doesn't seem to be any problem with USB devices, it could be that an app is conflicting with USB functionality. If you've downloaded an app from an unknown source there is the potential for it to contain malware, which could also be the cause of the problem. Skyrim legendary mac. https://coolsload468.weebly.com/my-rewards-harrahs.html.
In any case, it's worth uninstalling recently downloaded and installed apps. If they aren't the reason for the USB ports acting up, you can easily reinstall them from the App Store.
One way to remove apps is to use Launchpad or Finder. Or you can use a quicker, more effective method: CleanMyMac X.
To completely remove an app and every file associated with that app, use CleanMyMac.
CleanMyMac's Uninstaller tool scans your entire system for every trace of an app and completely removes it. Using the tool is every bit as easy as deleting an app manually.
- Download and launch CleanMyMac (free download).
- Click on Uninstaller from the sidebar menu.
- Select the app that you want to remove from the list.
- Click Complete Removal in the Smart Selector panel.
- Hit Uninstall.
While CleanMyMac lets you uninstall apps in bulk, in this case, you should delete apps one at a time until you find the culprit. CleanMyMac also lets you clean up unwanted junk, declutter your Mac and improve performance.
One way to uninstall apps manually is by using the Launchpad:
- Open the Launchpad.
- Find the app that you want to remove and click and hold the icon until it starts to jiggle.
- Click on the X that appears in the corner of the app, then click Delete.
Iso To Usb On Mac
You can also uninstall apps from the Finder:
- Open the Finder and go to Applications.
- Find the app that you want to remove and drag its icon to the Trash (you might need to enter your admin credentials to confirm you want to delete the app).
- Click on the Trash icon and select Empty Trash.
Having one or more USB ports not working on your Mac can be hugely frustrating, especially if you rely on those ports for data backup and external peripherals. That said, USB problems are quite rare and are usually easy to fix. Work your way through these troubleshooting tips until you find the one that works and restore your Mac to its full glory.
These might also interest you:
- 1. Mac Files Tips
- 2. Mac Software
- 3. Mac Storage Tips
- 4. Mac Troubleshooting
- 5. Mac OS
by Jenefey AaronUpdated on 2020-04-13 / Update for Mac OS
If you have a Mac system but want to run Windows on that system, you will need to create Windows 10 bootable USB on Mac for PC. Even if the Mac system uses Mac OS, you can still run Windows on it this way. Also, if you have got a new PC this way, you can install Windows on it.
In a case wherein the hard drive on the PC has been replaced, you will have to reinstall Windows on it. These are just some reasons as to why you may have to create bootable Windows 10 USB on Mac. This article will detail five different methods to create bootable USB Windows 10 on Mac.
Part 1: Can You Create a Windows Bootable USB on Mac
Wondering about, can you create a Windows bootable USB on Mac? You can easily do this with the help of the methods listed out in this article. Follow these methods to easily make bootable USB Mac Windows 10. These methods will answer all your questions about how to make a Windows 10 bootable USB on Mac.
[5 Methods] How to Create Windows 10 Bootable USB on Mac Mojave
Method 1: Make Windows Bootable USB Mac with PassFab 4WinKey
Thinking about how do I create a bootable USB drive for Mac easily? PassFab 4WinKey is an incredible tool that can be used to make Windows bootable USB on Mac. It can be used for several other purposes as well, like for removing or resetting the Windows Admin password. You can know how to create Windows 10 bootable USB on Mac using this tool by following the steps given below.
- After installing the program on your system, launch it, and insert a USB to it.
Click on 'USB Flash Drive' from the main interface and then on 'Burn'.
Once done, click on 'OK' on the pop-up window.
This is how simple it is to make bootable Windows 10 USB Mac with the help of this tool.
Method 2: Use UNetbootin to Install USB Driver on Mac
UNetbootin is a Windows 10 USB tool Mac that is completely free to use and can be used in a scenario wherein you have to make bootable USB Windows 10 on Mac system. For this, you need to keep a USB with the .iso file downloaded in it. Follow the steps below to know how you can use this program to know how to make a bootable USB Windows 10 on Mac.
- Connect the USB drive with the .iso file to your Mac system.
- From 'Disk Utility,' click on your USB drive.
- Click on 'Disk Image' and then on the '.' icon and select the .iso file that you have downloaded.
- Select 'USB Drive' from the drop-down menu in front of 'Type' and also select the name of your USB drive.
Once done, click on 'OK'.
Wait for a few minutes, and the USB would be formatted to a bootable drive.
Method 3: Use Boot Camp Assistant on Mac
If you wish to know how to make a bootable USB Windows 10 on Mac using Boot Camp Assistant, read on. You will need to have a USB drive with a storage capacity of 16 GB or more for this method to work. You can use the following steps to know how to make a Windows 10 bootable USB on Mac using Bootcamp Assistant.
- After inserting the USB drive into your Mac system, launch 'Boot Camp Assistant'.
Only check 'create a Windows 7 or later version install disk' and ignore all other options and then click on 'Continue'.
Download the .iso file from a trusted source, which will be detected automatically by Boot Camp Assistant and then click on 'Continue'.
After Boot Camp Assistant is done, check if USB deive has been renamed WININSTALL. Tap 'Quit' to close app and then eject the USB drive.
After a few minutes, the process would have been completed. However, you cannot use this method if you have macOS Mojave or other later versions of macOS.
No Usb Port On Macbook Pro
Method 4: Use Terminal to Make Bootable USB on Mac
Method 1: Make Windows Bootable USB Mac with PassFab 4WinKey
Thinking about how do I create a bootable USB drive for Mac easily? PassFab 4WinKey is an incredible tool that can be used to make Windows bootable USB on Mac. It can be used for several other purposes as well, like for removing or resetting the Windows Admin password. You can know how to create Windows 10 bootable USB on Mac using this tool by following the steps given below.
- After installing the program on your system, launch it, and insert a USB to it.
Click on 'USB Flash Drive' from the main interface and then on 'Burn'.
Once done, click on 'OK' on the pop-up window.
This is how simple it is to make bootable Windows 10 USB Mac with the help of this tool.
Method 2: Use UNetbootin to Install USB Driver on Mac
UNetbootin is a Windows 10 USB tool Mac that is completely free to use and can be used in a scenario wherein you have to make bootable USB Windows 10 on Mac system. For this, you need to keep a USB with the .iso file downloaded in it. Follow the steps below to know how you can use this program to know how to make a bootable USB Windows 10 on Mac.
- Connect the USB drive with the .iso file to your Mac system.
- From 'Disk Utility,' click on your USB drive.
- Click on 'Disk Image' and then on the '.' icon and select the .iso file that you have downloaded.
- Select 'USB Drive' from the drop-down menu in front of 'Type' and also select the name of your USB drive.
Once done, click on 'OK'.
Wait for a few minutes, and the USB would be formatted to a bootable drive.
Method 3: Use Boot Camp Assistant on Mac
If you wish to know how to make a bootable USB Windows 10 on Mac using Boot Camp Assistant, read on. You will need to have a USB drive with a storage capacity of 16 GB or more for this method to work. You can use the following steps to know how to make a Windows 10 bootable USB on Mac using Bootcamp Assistant.
- After inserting the USB drive into your Mac system, launch 'Boot Camp Assistant'.
Only check 'create a Windows 7 or later version install disk' and ignore all other options and then click on 'Continue'.
Download the .iso file from a trusted source, which will be detected automatically by Boot Camp Assistant and then click on 'Continue'.
After Boot Camp Assistant is done, check if USB deive has been renamed WININSTALL. Tap 'Quit' to close app and then eject the USB drive.
After a few minutes, the process would have been completed. However, you cannot use this method if you have macOS Mojave or other later versions of macOS.
No Usb Port On Macbook Pro
Method 4: Use Terminal to Make Bootable USB on Mac
This is the most complicated method out of all the methods described above and, therefore, must only be used as a last resort. You will need a USB drive for this method to work. Use the steps given below to create a Windows 10 bootable USB on Mac using Terminal.
- After connecting the USB drive to your Mac system, open Terminal.
- Key in 'diskutil list' and press 'Enter' key to see the list of connected drives and findyour USB drive's name.
- Run the command 'diskutil eraseDisk MS-DOS 'WINDOWS10' GPT@'.
- Download the .iso file on your Mac system.
- Key in the command 'hdiutil mount ~/Downloads/WINDOWS10IMAGE.iso' to mount .iso image.
- Key in the command 'cp -rp/Volumes/MOUNTED-ISO/* /Volumes/WINDOWS10/'.
- Run the command 'hdiutil unmount/Volumes/MOUNTED-ISO' and then close Terminal.
Eject your USB drive, and the process would be complete.
Method 5: Use Disk Utility to Create USB on Mac
Put USB drive into your Mac system and launch Disk Utility.
- On the left, right-click on the chosen USB drive and format it with MS-DOS (FAT).
Drag the .iso file to the USB drive. This step will start the writing process of the .iso file on USB.
A Bonus Tip: The Professional Way to Recover Data from Windows 10 Bootable USB
Although most of the above methods to create Windows 10 bootable USB Mac are pretty straight forward, while executing these steps, you may end up losing some important data from the Windows bootable USB. If this happens, don't be tensed. With the help of Tenorshare Windows Boot Genius, you can recover the lost data easily. Here's how you can do this.
Install and run this program on your system, click on 'USB Flash Drive' and then on 'Burn'.
This burned drive needs to be inserted in the system that won't boot. Keep pressing the F12 key while doing so. Play blackjack 21.
Run the program and from the main interface, click on 'Data Recovery'.
Select the disk from which you wish to recover the data and then click on 'Scan'.
Once you get the files, select them and click on 'Recover'. Transfer files from mac to pc windows 10.
After this, the accidentally deleted or lost data and files will be recovered.
Conclusion:
With the help of the above methods, you can easily create Windows 10 bootable USB on Mac High Sierra. The methods involving Terminal and Disk Utility are pretty complicated, while the other methods are fairly easy and effective. If, during the process, you accidentally lose out on some files and data, you can make use of Tenorshare 4DDiG for Mac Data Recovery to recover these files easily. It is recommended that to use Tenorshare Windows Boot Genius to recover lost data on windows 10, if you need.
